KENYON INTERNATIONAL P.O. Box 925 8 Heritage Park Road Manual Part # 143409Clinton, CT 06413 USAPhone: (860) 6
IMPORTANT SAFEGUARDS,SAVE THESE INSTRUCTIONS!1. Read all instructions.2. Do not touch hot surfaces. Use handles or knobs.3. To protect against electri
create safety problems through careless and improper use.
READ SAFETY INSTRUCTIONS BE FORE OPERATING YOUR APPLIANCEThe cooking surface and control areas of your glass ceramic cooktop are identied by permanen
Smother re or ame or use dry chemical or foam-type extinguisher. Use only dry pot holders.Moist or damp pot holders
POWER ON INDICATORThis display indicates whether the selected element is ON or OFF. POWER LEVEL DISPLAYDigital display indicates heat output of the se
12CALIBRATIONUpon application of electrical power to the cooktop, the controller will run a self-calibration process. The controller will then sound a
13HOT SURFACE INDICATORSYour KENYON cooktop features a Hot Surface indicator. Any element that has been in use and is switched off will illuminate an
WarrantyKenyon International, Inc (the “Company”) warrants its products in normal usage to be free of defects in materials and workmanship subject to
PLEASE READ THESEINSTRUCTIONS INTHEIR ENTIRETYBEFORE INSTALLATIONANY US OF APPLIANCE.DO NOT DISCARDTHIS MANUAL.SAVE FOR FUTUREREFERENCE.
CONTENTS Page Product Specications 1INSTALLATIONPackage Contents 2Electrical Requirem
1KENYON LITE TOUCH™1 and 2 BURNER TOUCH CONTROL PORTRAITSPECIFICATIONS® Three Burner Models: B40547 240V AC Two 6” (165mm) burner @ 1200
For future reference, please record the serial number of your cooktop here:STEP #1Unpacking the CooktopCarefully unpack the cooktop from its shipping
STEP #2Check the Electrical Supply Requirements This product must be installed in accordance with national, state and local electric codes. The follo
Before making the countertop cutout, check for clearance. Check to see if the cooktop will clear the front and side walls of the base cabinet. It is
When making cut-out of countertop, radius the corner of the cutout (1/4” radius is typical), to help prevent cracking of the countertop. Foll
Electrical ConnectionBefore proceeding further, verify that the power supply is disconnected. Verify that the appropriate electrical supply re
Kommentare zu diesen Handbüchern